The Fletcher Model N3114-AD/E roof bolter is designed for bolting in stope conditions as narrow as 6.5’ (2 m). Drilling, resin insertion, and bolting is all done from the MSHA canopy operator’s basket that is mounted on a boom that lifts and swings to allow multiple installations.

N3120-AD/E man basket roof bolter is designed for installing commonly used roof bolts in the back or either rib, in headings from 8 ft. 10 in. (2.69 m) wide to 17 ft. 6 in. (5.33 m) wide and up to 18 ft. 10 in. (5.74 m) high. In difficult ground conditions, protective canopies over the carrier operators’ platform and man basket allow the operator to install bolts from safe, protected positions.

Product Documents

• mN3114ADE
• N3120

The Fletcher Model N3016-AD/E roof bolter is designed for bolting in narrow heading conditions, as small as 10’ x 10’ headings. Once the bolt carousel is loaded, drilling, resin insertion, and bolting are all performed from the operator’s deck. Boom lifts, swings, and extends to allow multiple installations from one chassis position.

Fletcher Model N3020-AD roof bolter has a narrow articulating chassis, diesel power, and can bolt in headings from 3mx3m to 4mx4m.

Enclosed filtered cabs can be fitted on all Fletcher Metal/Non-Metal equipment, providing a cleaner and more quiet working environment.

Product Highlights

• Four wheel drive
• Auto spring set, hydraulic release brakes
• High pressure filters
• Fire suppression system
• Front and rear stabilizers
• Certified drill and tram canopy
• Articulating carrier
• Diesel/electric drill

Product Documents

• N3016
• N3016 spec
• N3020AD-specs