Your satisfaction is our main goal, that’s why the Hyster® H800-1050HD/S Big Truck series is designed to move your biggest loads with ease, from 80,000 to 105,000 pounds. If you’re moving heavy breakbulk, concrete or steel, you will quickly realize the power and dependability of these machines.

Product Highlights

• Powered by a strong and reliable EPA Tier 4 Final compliant Cummins® QSL 9L diesel engine with 350 HP. Is equipped with an after treatment package featuring selective catalytic reduction (SCR), and diesel oxidation catalyst (DOC).
• Includes robust and proven Dana Spicer Off-Highway (SOH) TE-32 powershift transmission.
• Features durable Kessler D102 drive axle.
• On demand cooling features hydraulically driven cooling fan that draws power only when cooling is required.
• Hibernate idle feature reduces engine idle speed to further conserve fuel.

More than 80 years of heritage building tough forklift trucks is brought to bear in the H550-700HD/S forklift, available in seven models with 55,000 to 70,000 lbs. of lifting capacity for use in applications; Steel Manufacturing, Sea Ports, General Cargo, Mining, and Stevedoring.

Product Highlights

• Tier 4 Final Cummins QSB 6.7L engine with SCR, DOC and DEF coupled with a ZF WG 211 5-speed powershift transmission.
• Water-cooled variable geometry turbocharger (VGT) design combines the benefit of both a small and large turbocharger in a single unit, enabling Hyster® Tier 4 Final engines to achieve significantly improved response compared to Tier 3 engines.
• The Idle Management System is another exclusive feature designed to save fuel without compromising the job. If the engine is idling for a period without any demands from the operator, it will drop rpms and enter into “Hibernate Idle”.
• Automatic throttle-up feature enables the truck to operate within its most efficient speed under varying load conditions.
• ECO-mode selectable performance levels: ECO eLo mode provides good performance, and optimizes the engine for best fuel economy. Hi-P mode provides the highest productivity, and is still able to deliver excellent fuel economy.

The versatile H400-450HD/S Big Truck series designed for outdoor use features four truck models available in both standard and short wheelbase variants with 40,000 and 45,000 lbs. of lifting capacity.

Product Highlights

• Tier 4 Final Cummins QSB 6.7L engine with SCR, DOC and DEF coupled with a ZF WG 211 5-speed powershift transmission.
• Water-cooled variable geometry turbocharger (VGT) design combines the benefit of both a small and large turbocharger in a single unit, enabling Hyster® Tier 4 Final engines to achieve significantly improved response compared to Tier 3 engines.
• The Idle Management System is another exclusive feature designed to save fuel without compromising the job. If the engine is idling for a period without any demands from the operator, it will drop rpms and enter into “Hibernate Idle”.
• Automatic throttle-up feature enables the truck to operate within its most efficient speed under varying load conditions.
• ECO-mode selectable performance levels: ECO eLo mode provides good performance, and optimizes the engine for best fuel economy. Hi-P mode provides the highest productivity, and is still able to deliver excellent fuel economy.

Hyster Company has always produced some of the best pneumatic tire lift trucks in the 19,000 pound and greater range. The all new truck series, the H360-36/48HD series now features an innovative Tier 4 Final engine. Hyster is blazing new trails with the introduction of H360-36/48HD Big Trucks for tough industrial applications in pipe handling, general & crated cargo, break-bulk, lumber, steel, concrete, stevedoring and other industries and applications. Over 80 years of our heritage building tough trucks is brought to bear in the new tough H360-36/48HD series with models offering 36,000 lbs. of lifting capacity at a 36-inch and 48-inch load center.

Hyster H360-36/48HD series trucks feature a capable Cummins QSB 6.7L diesel engine equipped with exhaust gas recirculation (EGR), and a variable geometry turbocharger. The engine is mated to a ZF WG 161 3-Speed powershift transmission.

Product Highlights

• EPA Tier 4 Final compliant innovative technology featuring a Selective Catalytic Reduction (SCR) system using Urea (Diesel Exhaust Fluid), a Diesel Oxidation Catalyst (DOC) and a dosing module for Urea injection.
• Get more for less with competitive industry 4-mode speeds and superb travel speeds. Front End options enable true rated capacity of various carriages for maximum productivity
• Heavy duty mast and carriage with reinforced mast channels
• Designed for versatility in multiple applications with attachments used for pipe clamps, tire handlers, concrete precast handling, and steel coil rams in multiple industry segments.

Hyster Company has always produced some of the best pneumatic tire lift trucks in the 19,000-36,000 pound range. Hyster is blazing new trails with the introduction of H300-360HD2 Big Trucks for tough industrial applications in the lumber, steel, concrete, breakbulk, general cargo, and stevedoring applications. Eighty years of our heritage building tough trucks is brought to bear in the H300-360HD2 series.

The latest series line-up features an all new range of 48” load center models, with 21,000 – 25,000 lb. of lifting capacity designed for long load centers, wide loads and heavy duty-cycle conditions ideal for tough industrial applications in the lumber, steel, concrete, breakbulk, general cargo, and stevedoring applications.

Product Highlights

• Hyster H300-360HD2 and H210-250/48HD series trucks feature a capable Cummins QSB 6.7 L diesel engine equipped with exhaust gas recirculation (EGR) and a variable geometry turbocharger. The engine is mated to a ZF WG 161 3-speed powershift transmission.
• EPA Tier 4 Final compliant innovative technology featuring a Selective Catalytic Reduction (SCR) system using urea (Diesel Exhaust Fluid), a Diesel Oxidation Catalyst (DOC), and a dosing module for urea injection.
• Get more for less with competitive industry 4-mode speeds and superb travel speeds. Front end options enable true rated capacity of various carriages for maximum productivity.
• Designed for versatility in multiple applications with attachments used for paper roll clamps, pipe clamps, tire handlers and other attachments in multiple industry segments.

Hyster Company has always produced some of the best pneumatic tire lift trucks in the 19,000-36,000 pound range. With the introduction of innovative Tier 4 Final solutions from Hyster, we have set the bar even higher with the H190-280HD2. Your job has become more demanding and the H190-280HD2 is up to the task. This Hyster® truck series is designed for heavy duty applications requiring high capacity and performance.

Product Highlights

• The H190-280HD2 features a Cummins QSB 4.5L diesel Tier 4 Final diesel engine with a turbocharger and intercooler mated to a powerful 3 – speed ZF WG 161 powershift transmission. EPA Tier 4 Final compliant with a Selective Catalytic Reduction (SCR) system
• Right-sized powertrain displaces less fuel and delivers superior fuel consumption and a Lower Total Cost of Ownership (TCO).
• Robust mast and front end design for a variety of applications in lumber, steel, concrete and general cargo applications. Designed for versatility with various front end attachments providing solutions in various industry segments.
• Ergonomically advanced interior – the ComforCab II™ is designed around the operator for great visibility and maximum operator comfort.

A versatile lift truck designed for indoor use, this truck is ideally suited for a wide variety of applications such as primary metals, stone, clay, glass and concrete products, and industrial and commercial machinery.

The S135-155 series is configured to provide the right lift truck for your application. Our truck packages with multiple powertrain combinations to choose from assure your cost of operations will be lowered. Each configuration offers improved efficiency, advanced dependability, and simple serviceability.

Product Highlights

• Patented DuraMatch transmission provides breakthrough features that include the Auto Deceleration System, controlled rollback on ramps, controlled power reversals to move loads more efficiently with less operator fatigue and product damage.
• Electronic hydraulic control valve precisely manages hydraulic pressure and flow to supply exactly the right amount of power for each function, reducing fuel consumption.
• Industrys Best Cooling capabilities. The S135-155FT series superior airflow and heavy-duty cooling systems keep heat in check, while providing world-class dependability in even the harshest of environments.

A versatile lift truck designed for indoor use, the Fortis® S80-120FT lift truck series is ideally suited for a wide variety of applications such as paper manufacturing, industrial/commercial machinery and primary metal products.

To exceed applications requirements, the series offers various powertrain combinations, a productivity enhancing ergonomic operator compartment as well as additional cooling and efficiency options.

Product Highlights

• Powertrain combinations include the durable Kubota 3.8L spark-ignited LPG engine
• Engine features Hyster® Variable Power Technology™, selectable performance modes that can be adjusted to maximize productivity or fuel economy to fit specific application requirements
• Advanced transmissions are built for durability and patented controllability, while extending tire and brake life up to 50%
• Ergonomic operator compartment includes optimized step height with non-slip tread, soft touch contoured hand grip and infinitely adjustable steer column

A versatile lift truck designed for indoor use, this truck is ideally suited for a wide variety of applications such as industrial and commercial machinery, fabricated metal products and motor freight transportation.

For applications requiring the use of attachments, Hyster® attachment-ready models are available with a factory modified front end, which allow for seamless truck and Bolzoni Auramo clamp interface.

Product Highlights

• S40-70FT series choice of 3 high output engines, 2 performance transmissions, 2 hydraulic controls and 3 cooling system options allows you to customize your truck to optimize the productivity in your application.
• Controlled power reversal virtually eliminates tire spin, increasing tire life by up to 50%. This feature is programmable to match the needs and experience of the driver.
• A choice of 3 aluminum core radiators, each with significant design and component improvements, provides the industry’s best cooling capacity – a key factor to increasing uptime and the economic life of your trucks.

The innovation of the Hyster® S50CT lift truck isn’t found in a few features. It’s everywhere you look, and in everything you feel and drive. The S50CT retains the legendary toughness, reliability and productivity that you’ve come to expect from Hyster. And all for a smaller price point.

If your application is agricultural, general warehousing and distribution, beverage distribution and bottling, light manufacturing, or retail the S50CT is the lift truck for you. The standard 2.4L engine is powerful and efficient.

Product Highlights

• Made to work hard but intelligently – the CT provides an excellent balance of fuel consumption and productivity.
• Ergonomically designed for operator comfort – from the low step height of 13.6 in. to the infinitely adjustable tilting steer column and non-cinching seatbelt, the operator compartment is designed for maximum comfort and safety helping your operators be more productive.