The stationary, electric Peterson 5050H Delimber Debarker Disc Chipper produces high quality low bark content chips for wood pulp and pellets, processing whole trees in one continuous operation. Equipped with a large feed throat, the 5050H can accept up to a 23-inch (56 cm) diameter single tree or multiple smaller stems.
The 5050H can be configured with a three or four pocket disc, with several optional sheavesizes to make precisely the chip you need. The standard three-pocket disc produces chips from ⅝ to 1 ¼ inches (16–32 mm) long, while the optional four-pocket disc produces chips from ½ to 1 inches (13–25 mm) long. Chipping production rates up to 150 tons (136 tonnes) per hour can be achieved depending on chip size and wood characteristics. Peterson’s heavy-duty 66-inch diameter, 4 ¾ inch thick (168 x 12 cm) chipper disc has replaceable ½ inch (13 mm) wear plates.
The stationary 5050H can be configured from 600 to 1000 hp (447–745 kW) at the disc depending on the needs of your application. An additional 600 hp (447 kW) electric motor powers the needs of the hydraulic system.
- The 5050H’s crusher-duty electric motors have a rugged cast-iron frame and feature dynamically balanced die-cast aluminum rotors for durability and long wear.
- Upper and lower chain flails strip bark and limbs from the stems, replaceable UHMW wear liners protect the flail housing sidewalls.
- Peterson Disc Chippers come with three or four pocket, 66” (167 cm) diameter chipper discs with traditional Babbitted knife systems, or Key Knife™ systems.
- Ergonomic joystick controls provide precise control of the two-section knuckle-boom log loader. Top, end-loading, or high rotation long spouts are available.